Logic analyzer and pattern generator window:

This figure displays the main program window when operating in the logic analyzer mode. Elements such as markers, scroll bar and sampling frequency settings panel (time base) are similar to the corresponding elements when operating in the oscilloscope mode. Therefore we will only describe elements particular to the logic analyser mode in this section. To the left of the work screen there is a panel containing the names of all 16 channels, which are functionally divided into two buses.

The first 8 channels are related to bus A 1 and the next eight channels are related to bus B 2 . Channels of bus A (further bus A) are always used as the 8-channel analyzer. Channels of bus B (further bus B) can be used either in the mode of additional 8-channel logic analyzer or as an 8-channel pattern generator, or disabled.

The operation mode of bus B is set by the corresponding buttons on the control panel D. Furthermore, the color and name of each channel can be changed and for this you need to point to the name of the selected channel with the mouse cursor and left click. This will cause the channel settings window to open. To change the channel name you need to input the new name in the "Channel name" field. To change the channel color you need to left click on the "Channel color" dropdown list and then select the required color. If there is not a suitable color in the list then click on color "Custom…" and the standard color settings window will open. To apply these changes you need to click the ?? button and to undo all changes inserted you need to click the Undo button.

Beneath the "Channels" panel there are two buttons 3 that allow the opening and saving of all channel names and colors in the file. 22